1. Excellent demoulding performance
When Sakurai release agent is sprayed to the mould surface, its effective Ingredients form dense film at once. The membrane in the injection Process is high pressure resistant, scouring resistant, low friction Coefficient, effectively prevents die-casting products to soldering with the Mould. It can help the die-casting product not adhering to mould and Prevent product variant. At the same time the excellent lubrication Performance speeds up the flowing aluminum liquid, so that the aluminum Liquid can rapidly form a mould. Avoid the product defects and pull.
2. Excellent surface brightness
Sakurai products adopt rare and special materials. It can effectively solve The problems such as casting surface turns black, too much water lines And cold shut. Can solve the problems happening in postprocessing, such As: polishing and electroplating.
3. Fully protect mould
Sakurai release agent forms a protective film on the mould surface. Effectively reduce the heat for the mould and reduce the impact from the Liquid aluminum to the machine. Correct selection of high quality mould Release agent can effectively protect the mould , prolong the life of the Mould and reduce the repair.
4. No carbon deposition
Sakurai release agent is very easy to use. No carbon deposition, no in-Cavity buildup, no mould scale and no oxide skin. Reduce the times to Clean the mould, and the product surface is bright and clean, does not Affect the subsequent spray plating, polishing and surface treatment.
5. Excellent high temperature resistant performance
Sakurai release agent has good thermal stability and chemical stability. In The using range of temperature it do not oxidize, not burn, not corrode Mould and not resolve residues on the mould surface. Even at high Temperature 300 ℃, weight lost few (thermal weight loss not more than 10%). Thus assure, at the high temperature, a strong demoulding film is Formed on the mould. Restraining high temperature sintering, reach the Role of lubrication and demoulding.
6. Good cooling effect
In die casting process because of the high temperature, mould has been Heating, the temperature of liquid metal rises, and the high mould Temperature makes die casting defect. Sakurai release agent effectively Controls these problems. Such as: soldering, blistering, cracking, and Burned. Being working in High temperature for a long time , the mould Material strength decreased, causing the mould crack and shorten the Service life.
7. High safety performance
Sakurai release agent non-toxic, non-flammable, no corrosion, no chemical Reaction. In the process of use it does not contain harmful smoke. The Mould and product surface has no residue, is easy to clean and Maintenance and does not affect the subsequent processing.
⊙Physical and chemical data