Elastic Adhesvie

Bring the best quality and services

Soldering Electronic & Flux

Industrial Adhesives

Industrial Tape

Wire harness processing machines

Mold Release Agent

Anti Rust & Coating Agent

Lubricant Oil & Cleaning

Refinish automotive products

Industrial Adhesives

View Full

Name:

Elastic Adhesvie

Code No:

elastic adhesive

Maker:

Adhesive Cemedine

Package:

333ml/catridge, 1 kg/set

Application:

Based on the special silicone modified polymer, Cemedine elastic adhesive series is a multi-function adhesive, featuring robust rubber-like elasticity and adhesiveness over an extensive range. The elastic adhesive uses a combination of flexibility and robustness to solve the problems of "being hard and brittle" found in the conventional adhesives featuring heat resistance and durability, and lack of heat resistance and durability found in soft adhesives such as rubber and vinyl adhesives, thereby making a significant contribution in all industrial arenas.

1.Adhesives formed into rubber-like elastic bodies

Absorb external vibration and shock.
Absorb thermal strain such as expansion and shrinkage (highly resistant to heat cycle).
Have little stress to be concentrated on bonding interfaces.
Adhere materials of different types having big differences in linear expansion coefficients.
Allow adhesion with substrate having small surface strength (plaster board, calcium silicate board, ALC, etc.).
Exhibit great peeling adhesive strength.

Torsional free damping elasticity measurement data

The glass transition point of the elastic adhesive (Tg) is -60 degrees Celsius, as shown in the above drawing. Curing film of the elastic adhesive exhibits flexible rubber-like elasticity within -60 to 100°C, a temperature range severer than the general working temperature range for adhesive bondage, bringing about excellent results in various types of bonding characteristics.

2.Adhesive providing stability for all environments

The elastic adhesive featuring flexible and robust elastic film serves to distribute and absorb internal stress, and provides stable adhesive strength in all environmental changes, exhibiting excellent balance.

3.Superb adhesiveness for plastic materials

Epoxy resin elastic adhesives PM165, PM200, PM210 and EP001 provide superb tensile shear strength for plastic materials.
The EP001 has allowed adhesion of the engineering plastics which could not be bonded in the conventional method.

Specification

List of one-part elastic adhesive

Product name		PM100	PM155	PM165	PM300
Characteristics		The product has the excellent elongation. Primer MP1000 is used.	Low pollution to natural stone. Both adhesion and sealing functions. Primer M2000 is used.	Non-primer·Quick curing and multiple applications. Low pollution to natural stone. Excellent adhesion also suited to plastics.	Elastic adhesive is used in combination with liquid nail; only pressing is sufficient, without the need for mixing or temporary fixing. (Cemedine PEG method)
Application		Adhesion of the materials easily broken by external forces. Adhesion of materials having small surface strength --- plaster boards, calcium silicate boards, ALC boards, etc. Adhesion of large sized panels. Adhesion on the ground having convexes and concaves, and surfacings.		Adhesion which requires quick curing, multiple applications, and versatility, and Creep characteristics improved by applications given on the right.	Adhesion of nails and machine screws which cannot be held temporarily. For various repairs: polyvinylchloride wash board, name plate, non-slip, polyvinylchloride tile.
Product form		One-part mastic adhesive			Elastic mastic
Base		Special polymer containing silyl group		Special polymer containing epoxy and silyl groups	Base resin Special silicone modified polymer	Liquid nail Ethylcyano- acrylate
Appearance		White paste	Ivory paste Gray paste	Gray paste	Whitepaste	Transparent- paste
Viscosity (Pa・s/23°C)		400	350	320	130	-
Usable time (23°C)		20min	20min	10 to 15min	30min (initial curing in 10 seconds to 5 minutes when used in combination with liquid nail)
Adhe- sion characte- ristics	Tensile shear strength	0.90N/mm²	2.10N/mm²	2.10N/mm²	2.00N/mm²
Adhe- sion characte- ristics	T type peeling strength	4.70N/mm	4.70N/mm	1.20N/mm	5.10N/mm
Curing properties	Elongation	200	180	100	170 (Base resin)
Curing properties	Hardness (Shore A)	28	45	48	35 (Base resin)
Formaldehyde grade
Capacity standards		333ml cartridge 4liter pail can 24kg pail can 320ml clean pack	333ml cartridge	333ml cartridge 4liter pail can 24kg pail can 500ml film pack	Set (170ml + 20ml of liquid nail) Sold separately (333ml cartridge) Sold separately (50ml liquid nail)

Note: For curing properties, elongation conforms to JIS K6251.

Two-part adhesive

Product name		PM200 (PM210)		EP001
Characteristics		Highly durable adhesive PM200: anti-flow type PM210: flow type		Flow type featuring great high shear and peeling strength. Initial curing in 30 minutes/1kg
Application		Adhesion of different types of materials having different heat expansion coefficients. Adhesion of the materials easily broken by shock, vibration and other external forces (large sized tiles, wall glass, thin stone materials). Adhesion of materials having small surface strength. Adhesion of various types of panels as building materials (plaster boards, ALC, etc.). Adhesion of positions having noticeable temperature changes.		Application required to have high peeling and shear strength. Adhesion of different types of materials having different heat expansion coefficients. Adhesion at positions subjected to great vibration and stress changes. Adhesion of engineering plastics.
Product type		Two-part mastic adhesive		Two-part quick curing adhesive
Base		Base resin: epoxy resin, curing agent: modified silicon epoxy matrix
External appearance		Base resin White paste	Curing agent Light black paste	Base resin Colorless agent	Curing agent liquid Light yellow liquid
Viscosity (Pa・s/23°C)		PM200:270 PM210:12	PM200:120 PM210:74	15	18
Standard mixing ratio (weight percentage)		Base resin: Hardener = 1 : 2		Base resin: Hardener = 1 : 1
Workability	Usable time	30min		10min
Workability	Pot life	120min. (3kg mixed at 23°C)		20min. (200g mixed at 23°C)
Adhesion characteristics	Tensile shear strength	5.40N/mm²		10.8N/mm²
Adhesion characteristics	T type peeling strength	3.90N/mm		4.30N/mm
Curing properties	Elongation	140		200
Curing properties	Hardness (Shore A)	62		78
Formaldehyde grade
Capacity standards		3kg set Base: 1kg Hardener: 2kg		40g set (Base: 20g, Hardener: 20g). 320ml set (Base: 160ml, Hardener: 160ml). 2kg set (Base: 1kg, Hardener: 1kg).